Probably one of the most challenging tests for air tool hoses is in the construction industry, more specifically for roofing and framing nail gun applications. The hoses used in these fields have to be super tough to withstand being dragged across roofs, having lumber dropped on them, and getting stretched to the limit, all this in extreme hot and cold weather conditions.

As a contractor for over 20 years and the owner of a company that does framing and roofing , I have used just about every type of air hose and assembly available for nail guns. What I have found is on an average with heavy usage you would be lucky to get more than a years service out of a hose before it had to be repaired or replaced. One of the main areas that give out is the coupling connection on the hose, this point gives very little notice before it faults. I would gladly spend more money for a hose that would hold up better, but cost was not the issue. The more expensive hoses are usually made lighter weight so they are easier to work with but don't hold up any longer than the cheaper heavier models. You are paying for the light weight feature and getting roughly the same durability as the heavy weight cheaper costing type. Any air hose can break under extreme conditions, the idea is to have a hose that can be repaired on the spot in seconds, thus avoiding costly down time.

The HIGH TECH AIR CONNECTION was created to fill that need, it features a super tough light weight hose that will hold up in all weather conditions, flexible and kink resistant to make it easier to work with, and best of all a unique single end fitting DIRECT FIT connection system that enables the hose to be plugged directly into the tool and the air source without the need for a hose fitting, this feature eliminates timely repairs and replacements. A splicer fitting is also available for instantly connecting two or more hoses together or to repair an unlikely mid hose tear. This air hose system can be used for standard air tool application and can be installed in place of your current system in minutes.

Where time and production matter, down time with a leaky or broken hose can be very costly, in the past 17 years I have been using the High Tech system, I have never had to replace a damaged hose. Experience the difference for yourself, make the change to HIGH TECH AIR CONNECTION TM

Bob Terenzoni owner and creator of HIGH TECH AIR CONNECTION TM